All Equipment for FM and TV Broadcasting Stations
Showing 265–276 of 433 results
TRANSMITTER AM COMPACT 1000
1kW AM Transmitter
Output Power 1000 nominal watts Load Impedance 50 Ohms unbalanced Frequency response +/- 0.5 dB between 40 Hz and 10 Khz Harmonic Distortion less than 1.5% at 90% modulation, measured between 40Hz and 10Khz Modulation Capacity Better than 140% at positive peak at 100% of Nominal Power Carrier Amplitude Shift Less than 1% Radiation of Harmonic and Spiral Signals Better than 75 dB below the carrier level Residual Noise Better than 65 dB Frequency Stability +/- 5 Hz or better Audio Input Level + 10 dBm nominal for 100% modulation Supply Voltage 110 VAC / 220 VAC with taps of +/- 5% and 10% 1 phase Power Consumption Typical efficiency of 80% for 100% of rated carrier power Operating Conditions Ambient temperature - 5ºC and 40ºC Relative humidity between 0% and 90%. Altitude between 0 and 3500 meters above sea level Size and Weight 80 Kgr. Height 84cm, Depth 60cm, Width 60cm
TV TRANSMITTER 15kWps UHF
The PLine is the Multi Amplifier Liquid Cooled Transmitter family
P is equipped with Driver Dual Driver Option and N° 6 plug-In Amplifiers.
It is equipped with High Efficiency Wideband UHF/VHF and Low VHF state-of-the-art amplifiers characterized by high-power density and excellent signal quality granting optimal parameters such as shoulder attenuation and MER.
The Pamplifiers are hot pluggable and are equipped with 3x redundant Hot Plug-in power supplies each, assuring the maximum reliability and the easiest maintenance.
TV TRANSMITTER 20kWps UHF
20,8 kWps Analog
Typology: UHF Band IV & V
The PLine is the Multi Amplifier Liquid Cooled Transmitter family
Pis equipped with Driver Dual Driver Option and N° 8 plug-In Amplifiers.
It is equipped with High Efficiency Wideband UHF/VHF and Low VHF state-of-the-art amplifiers characterized by high-power density and excellent signal quality granting optimal parameters such as shoulder attenuation and MER.
The Pamplifiers are hot pluggable and are equipped with 3x redundant Hot Plug-in power supplies each, assuring the maximum reliability and the easiest maintenance
TV TRANSMITTER 30kW ps UHF
The PLine is the Multi Amplifier Liquid Cooled Transmitter family
P is equipped with Driver Dual Driver Option and N° 12 plug-In Amplifiers.
It is equipped with High Efficiency Wideband UHF/VHF and Low VHF state-of-the-art amplifiers characterized by high-power density and excellent signal quality granting optimal parameters such as shoulder attenuation and MER.
The Pamplifiers are hot pluggable and are equipped with 3x redundant Hot Plug-in power supplies each, assuring the maximum reliability and the easiest maintenance
TV TRANSMITTER 40kW ps UHF
41,6 kWps Analog
Typology: UHF Band IV & V
The PLine is the Multi Amplifier Liquid Cooled Transmitter family
P is equipped with Driver Dual Driver Option and N° 16 plug-In Amplifiers.
It is equipped with High Efficiency Wideband UHF/VHF and Low VHF state-of-the-art amplifiers characterized by high-power density and excellent signal quality granting optimal parameters such as shoulder attenuation and MER.
The P amplifiers are hot pluggable and are equipped with 3x redundant Hot Plug-in power supplies each, assuring the maximum reliability and the easiest maintenance.
UHF B IV-V BROADCAST TV PANEL
The UHF Band IV-V TV panel with 1KW maximum capacity and 7/16″ type connector is a heavy duty panel with stainless steel dipole, hot dipped steel radome and reflector, PTFE insulators and stainless steel hardware. Suitable for high power systems with horizontal or vertical polarisation. Installed on all 4 sides of a tower, they determine omnidirectional radiation patterns, UHF panels can be manufactured for vertical or horizontal polarisation on request.
