- FM Transmitters
- High Power FM Transmitters
- Medium Power FM Transmitters
- Low Power FM Broadcast Transmitter
- FM Amplifiers
- Portable FM Transmitters
- FM Broadcast Antenna
- RDS Encoders
- Receivers & Re-broadcast
- DAB/DAB+ Transmitters
- Dab Antennas
- AM Transmitters
- SW BROADCAST TRANSMITTER
- RF Connectors and Coxial Connectors for Broadcasting
- FM Antenna System Package
- STL Link Antennas
- Radio Link Antennas
- Radio Coupling Cables
- FM Power Splitters
- RF FEEDER CABLES
- Motorized RF Switch
- RF Dummy Load
- FM Combiners
- FM Cavity Filter
- Remote Control
- RF Switches
- Hybrids Directionals Couplers and Starpoint joints
- FM Isofrequency
- Reportage Unit
- Radio Accessories
- STL Link Radio Studio to Transmitter Link
- Radio Links
- STL Link Amplifier Microwave
- Pattern design & network Planning
- Complete FM Transmitters Packages
- Used Broadcast Equipment
Accueil » All Equipment for FM and TV Broadcasting Stations » Yellowtec M!ka YT 3205 Anglepoise Mic Arm
Yellowtec M!ka YT 3205 Anglepoise Mic Arm
Category: Table stands and small adapters
Description
Yellowtec M!ka YT 3205 Anglepoise Mic Arm
DESCRIPTION
As the golden ratio of m!ka Mic Arms, the M-sized m!ka Microphone Arm is the perfect allrounder in terms of microphone arrangements. The mic boom is a good choice to shape working desks or interviewing areas where the distance between microphone arm and speaker is not higher than 31” (78.7cm).
With the m!ka Mic Arm, there are only a few knurled screws to achieve a secure fit and professional balancing of your microphone according to its weight. Each m!ka Mic Arm allows you to customize your mic’s position within seconds. Take full advantage of the given variety of mounting options to tailor your mic setup to your individual needs.
DETAILS
✓ Max. range: 78.7cm / 31” | Weight: 1.04kg
✓ 5/8″ thread to attach your microphone
✓ Available colors: aluminum / black
✓ Supports microphones with up to 1.5kg
✓ Adjustable friction joints to balance the arm with mic weight
✓ Internally located wiring concealed by tubes and joints
✓ Durable, silk-mat anodized aluminum construction
✓ Renowned German craftsmanship
✓ Various options for table, wall or pole mounting available
✓ Compatible with the whole m!ka Mounting System
SCOPE OF DELIVERY (according to your choices)
✓ m!ka Mic Arm M
(aluminum/black | without/with On Air indicator)
✓ Internal wiring (open cable ends/mounted XLRs)
✓ Insertion sting to fit various mounting adapters
✓ m!ka Plastic Sleeve attached to the sting
Shipping & Delivery
