500 Watt VHF Transmitter ETV500V


500 Watt VHF Transmitter ETV500V

Amplifier Digital ready

The 500 Watt VHF Transmitter ETV500V is built with LDMOS technology.It is composed of an A.M. Modulator, an IF/CH TV Converter (DRIVER) and an 500W peak sync. AMPLIFIER. This TRANSMITTER is used for transmitting Analog TV signal, ensuring high efficiency and excellent linearity for all VHF Band.

Synthesized AM Modulator PAL of NTSC System

Driver TV IF/CH Converter (RF out 5W Peak Sync.) with OL low Noise (programmable Channel).

AGC and ALC Control with Peak Detector

Combined Carrier wideband solid state Amplifiers (LDMOS Tech.)

Display Multi-function on all DEVICE.

Switching Power Supply with PFC

Modular and compact construction with 19″RACK Cabinet

LOW POWER Consumption

Maintenance Free

Notch Band-Pass Cavity FILTER (optional)

VIDEO inputImpedance 75ohm –Input level 1Vpp adj. –

White/Sinc level 95% – Modulation limiter White clipper

Sync pulse compression < 3% – S/N ratio > 55 dB – Connector BNC femaleAUDIO input Impedance 600 Ohm – Input level 0 dBm +/- 6 dB – Type Balanced or unbalanced – Distorsion < 0.8% Bandwith 20 – 15000Hz – Frequency response  20Hz – 16KHz – Connector  XLR-CANNON IF OUTPUT Impedance 50 Ohm – IF out CONNECTOR SMA female – IF level -10 dBm (Typical) – Spurious level -60dBVideo Carrier Freq. 38.9MHz PAL – 45.75MHz NTSC ; Audio Carrier Freq. 33.4MHz PAL – 41.25MHz NTSC

Frequency Band


Output RF Power

600W p.s. – Connector: 7/16″

Gain (Amplifier)

20 dB

Spurious emissions

-60 dB


-60 dBc

Amplification class



50 Ohm


20 dB (-3 dB start and full power automatic switching)


SWR – max temperature – RF overdrive

Voltage Supply

100-260 Vac/50Hz

Power Consumption

950W (white video)

Cooling System

forced air

Operating temperature

-30 to 40°C


H(8Units) CABINET RACK 19″ – depth:60cm


23 Kg



© 2020 Eletec Radio Broadcasting Equipment & Transmitters. All rights reserved. Design by Offshorewebmaster.com