1000W UHF Television Transmitter ETV1000U

Category: .

Product Description


Amplifier Digital ready

The TRANSMITTER TV 1KW p.s. UHF model “ETV1000U” is built with LDMOS technology. It is composed of an A.M. Modulator, an IF/CH TV Converter (DRIVER) and an 1KW peak sync. AMPLIFIER. This TRANSMITTER is used for transmitting Analog TV signal, ensuring high efficiency and excellent linearity for all UHF Band.

Synthesized AM Modulator PAL of NTSC System

Driver TV IF/CH Converter (RF out 5W Peak Sync.) with OL low Noise (programmable Channel).

AGC and ALC Control with Peak Detector

Combined Carrier wideband solid state Amplifiers (LDMOS Tech.)

Display Multi-function on all DEVICE.

Switching Power Supply with PFC

Modular and compact construction with 19″RACK Cabinet

LOW POWER Consumption

Maintenance Free

Notch Band-Pass Cavity FILTER (optional)

VIDEO input Impedance 75ohm –Input level 1Vpp adj. – White/Sinc level 95% – Modulation limiter White clipperSync pulse compression < 3% – S/N ratio > 55 dB – Connector BNC female
AUDIO input Impedance 600 Ohm – Input level 0 dBm +/- 6 dB – Type Balanced or unbalanced – Distorsion < 0.8% Bandwith 20 – 15000Hz – Frequency response  20Hz – 16KHz – Connector  XLR-CANNON
IF OUTPUT Impedance 50 Ohm – IF out CONNECTOR SMA female – IF level -10 dBm (Typical) – Spurious level -60dBVideo Carrier Freq. 38.9MHz PAL – 45.75MHz NTSC ; Audio Carrier Freq. 33.4MHz PAL – 41.25MHz NTSC
Frequency range

470-860 MHz

Output RF Power

1KW p.s. – Connector: 7/16″

Gain (Amplifier)

20 dB

Spurious emissions

-60 dB


-60 dBc

Amplification class



50 Ohm


20 dB (-3 dB start and full power automatic switching)


SWR – max temperature – RF overdrive

Voltage Supply

100-260 Vac/50Hz

Power Consumption

2600W (white video)

Cooling System

forced air

Operating temperature

-30 to 40°C


H(11Units) CABINET RACK 19″ – depth:60cm


30 Kg

© 2016 Eletec Radio Broadcasting Equipment & Transmitters. All rights reserved. Design & Optimized by iGent Digital

Click Me