Digital Microwave TV Link EG Series

Digital Microwave TV Link EG Series

Digital Microwave TV Link EG Series

Category: .

Product Description

Digital Microwave TV Link EG Series

DVB-S MICROWAVE LINK

The microwave link EG series is the ELETEC offer for the distribution of digital signals, designed
for high flexibility along with an extreme ease of use.

EDKLG system is attractive for both individual point-to-point links and complete distribution networks. The transmitter, built in 3HE cabinet, is equipped with a plug-in DVB-S standard QPSK modulator with ASI input and modulation capacity up to 48Mbit/s . The receiver, with two ASI output signals, is built in a 1HE cabinet, integrating a down converter and an IRD. An external optional 1HE demodulator is
required for Audio-Video outputs. The EDKLG series is available in different frequency ranges
from 1.5 to 14.5GHz with different output powers, both in the internal versions or with
external RF heads. In the latter case RF parts are fitted into waterproof tin cases suitable to be
mounted on the rear of parabolic antennas. The external head is connected to the internal
console by a single coaxial cable which passes the RF signal and the power supply. This series
is developed to support only Multi Frequency Network architectures .
For particular difficult connections, a series of external solid-state amplifiers, including highpower
ones, is also available.

Microwave TV link 

Low power consumption
Excellent noise figure
Remote control interface
High stability synthesized oscillators
Main or battery-fed power supply (optional)
MFN mode supported

 

TRANSMITTER
 
Data input
ASI, BNC female, 75 Ohm
TS format
Burst mode or continuous mode
ASI length input
188 byte or 204 byte (with automatic adaptation)
TS input data rate
Up to 48 Mbit/s (with automatic adaptation)
Modulation
QPSK according to ETSI EN 300 421 (DVB-S)
Symbol Rate
from 2.031 to 32.000 MBaud
(see table on download section)
Outer coder
Reed Solomon encoder 188 / 204
Inner coder
Punctured convolutional
Code rates
FEC = 1/2, 2/3, 3/4, 5/6, 7/8
IF frequency
70 MHz – 2 x SMB connectors
IF level
0 dBm
IF bandwidth [MHz]
1.35 x Symbol Rate
Visual signalling leds
Data pres, 188 / 204 mode, data input overflow, system ok
Communication port
RS-232
RF Output Impedance
50 Ohm
Local oscillators
Low noise PLL controlled
Output power backoff
QPSK -3 dB typical
RECEIVER
RF Input Impedance
50 Ohm
Receiver input level
from -85 dBm to -35 dBm
Gain
>30 Db, 35dB typical
Noise figure
< 5 dB
Outputs
2 x ASI, BNC female, 75 Ohm
L band, BNC female, 75 Ohm (for external IRD)
Local oscillators
Low noise PLL controlled
EXTERNAL IRD (optional)      
Inputs
L band, F female , 75 Ohm
ASI in, BNC female, 75 Ohm
Outputs
2 x ASI, BNC female, 75 Ohm
2 x Analog Video, BNC female, 75 Ohm
2 x Analog Audio, XLR male
2 x Analog Audio, RCA
GENERAL
Main AC input voltage
230 VAC (110 VAC or 36 – 50 VDC option)
Operating temperature range
-5 °C to +45 °C
Relative Humidity
95 % non condensing
Cooling
Natural convection
Tx dimensions (W x H x D)
438 x 132 x 418 mm
Tx size
19” 3 HE
Tx Weight
12 Kg
Rx dimensions (W x H x D)
483 x 44 x 521 mm
Rx size
19” 1 HE
Rx weight
3 Kg

© 2016 Eletec Radio Broadcasting Equipment & Transmitters. All rights reserved. Design & Optimized by iGent Digital

Click Me