Placeholder

FM Isofrequency adapter

Category: .

Product Description

FM Isofrequency adapter

The FM isofrequency adapter allow to synchronize one or more FM repeaters operating over the same area and using the same frequency.

Installation  is very quick the unit must be connected between the STL receiver and the FM modulator and it will also generate a 10MHz reference signal used for the FM modulator: no GPS frequency reference is needed.
The unit can be controlled remotely with an optional internal webserver (opt.LAN) which will also provide a 9600bps general purpose serial port that can be used, for example, to control the connected transmitter.

The best results are obtained only through a careful planning of the iso-frequency network, we will provide a free consulting service for all customers interested.

Listen an audio sample, recorded in an urban area where the signals, coming from two transmitting sites, were received at the same level.
Starting from 0 to 10 seconds the device is bypassed, from 11 seconds onwards the delay compensation is turned on but the transmitting frequencies are still not PLL-locked.
From 19 seconds onwards, the PLL is locked and the heterodyne whistle disappears.
The FM isofrequency adapter allow to synchronize one or more FM repeaters operating over the same area and using the same frequency.

© 2016 Eletec Radio Broadcasting Equipment & Transmitters. All rights reserved. Design & Optimized by iGent Digital

Click Me