The ETV1000 1kW TV TRANSMITTER VHF model "ETV1000V" is built with LDMOS technology.It is composed of an A.M. Modulator, an IF/CH TV Converter (DRIVER) and an 1KW peak sync. AMPLIFIER. This TRANSMITTER is used for transmitting Analog TV signal, ensuring high efficiency and excellent linearity for all VHF Band.
|
VIDEO input
|
Impedance 75ohm - Input level 1Vpp adj. - White/Sinc level 95% - Modulation limiter White clipperSync pulse compression < 3% - S/N ratio > 55 dB - Connector BNC female
|
|
AUDIO input
|
Impedance 600 Ohm - Input level 0 dBm +/- 6 dB - Type Balanced or unbalanced - Distorsion < 0.8% Bandwith 20 – 15000Hz - Frequency response 20Hz – 16KHz - Connector XLR-CANNON
|
|
IF OUTPUT
|
Impedance 50 Ohm - IF out CONNECTOR SMA female - IF level -10 dBm (Typical) - Spurious level -60dB Video Carrier Freq. 38.9MHz PAL - 45.75MHz NTSC ; Audio Carrier Freq. 33.4MHz PAL - 41.25MHz NTSC
|
|
Frequency Band
|
I – II – III VHF
|
|
Output RF Power
|
1KW p.s. – Connector: 7/16"
|
|
Gain (Amplifier)
|
20 dB
|
|
Spurious emissions
|
-60 dB
|
|
Harmonics
|
-60 dBc
|
|
Amplification class
|
AB
|
|
Impedance
|
50 Ohm
|
|
ALC
|
20 dB (-3 dB start and full power automatic switching)
|
|
Protections
|
SWR – max temperature – RF overdrive
|
|
Voltage Supply
|
100-260 Vac/50Hz
|
|
Power Consumption
|
W (white video)
|
|
Cooling System
|
forced air
|
|
Operating temperature
|
-30 to 40°C
|
|
Dimensions
|
H(8Units) CABINET RACK 19" - depth:60cm
|
|
Weight
|
30 Kg
|
Synthesized AM Modulator PAL of NTSC System Driver TV IF/CH Converter (RF out 5W Peak Sync.) with OL low Noise (programmable Channel). AGC and ALC Control with Peak Detector Combined Carrier wideband solid state Amplifiers (LDMOS Tech.) Display Multi-function on all DEVICE. Switching Power Supply with PFC Modular and compact construction with 19"RACK Cabinet LOW POWER Consumption Maintenance Free Notch Band-Pass Cavity FILTER (optional)
