| Frequency range |
87.5 - 108 MHz |
| RF connector |
Type N for RF input - type 7/16 for R.F. output |
| Impedance |
50 Ohm input and output power |
| Input Power |
40-60W ALC setting from 100 W to 1.2 KW |
| Output Power |
0-5000W - ALC - self redundancy (if one of 4 x 1250W sub-amplifiers breaks, it will automatically reduce the output power to a safe value while still operating) |
| Overall efficiency |
Better Than 70% |
| Harmonic & Spurious |
<-75dBc- AM residual as -75 dB |
| RF Probe |
-60 dBC via BNC connector |
| Power Supply |
Switch Mode (Double conversion voltage mains direct)(48 V / 20 A) |
| Design Data |
| Type MOS-FET amplifier |
|
| Display |
Forward power |
| |
Reflected Power |
| |
DC Supply Voltage |
| |
Power Supply Temperature |
| |
Power Amplifier Voltage |
| Protections |
| Power Supply |
180 - 240V AC +/-20% |
| RF Amplifier |
RF module over-temperature 70deg C - derates to 1000W at 80deg C |
| VSWR protection |
(an antenna SWR value higher than 100 W send the equipment in protection, lowering automatically the output power) |
| Dimensions |
Rack (4U) 18H x 48W x 67D (CM) |
| Weight |
35Kg |
| Cooling |
4 Blowers 24V DC 80 x 80 |
