broadcast, fm transmitters, amplifiers, fm transmitters, fm amplifiers, tv transmitters, tv, broadcasting equipment, Broadcast Transmitter, Radio FM & TV, Broadband, mosfets, RF Amplifiers, Antennas, STL's, Boosters, Translators, RF Accessories

Home>STL system - 1.5-2.5 Ghz

STL system - 1.5-2.5 Ghz

STL system - 1.5-2.5 Ghz

RL1525 STL / Radio Link

The 1525 Composite STL is designed to satisfy the needs of all broadcasters, for a very low noise transmission and an Top quality receipt of the signal, operating Frequencies: 1500-2500 Mhz

More details

Request for quotation


 

  • Zero to 5 watts output power, front panel adjustable
  • Remote control built in in RS 232
  • Externally programmable in 25 Khz steps
  • SCA's
  • RF monitoring BNC 
  • IF monitoring in the receiver's front panel
  • All functions via LCD password protected
  • 12-15 Vdc power capability (opt) 
  • Meets or exceeds all FCC and CCIR requirements

    •  

    Frequency Ranges

    		1.5~2.5 GHz (20MHz band)
    Type of Modulation FM Class F3
    VCO Tuning 25 MHx Max
    Frequency Stability ± 2,5ppm (Bettr 0n request)
    Synthesizer Step 25KHz
    Power Output 1 or 5 Watts
    Spurious Emission < -80 dB or better
    Harmonic Emission < -65 dB (-80 dB on request)
    Stereo Separation > 55 dB @ 1 KHz
    Distorsion < 0.2% (TYP 00.8 %) @ 1KHz)
    Base Band 30 Hz - 60 KHz within 0.15 dB
    Unweighted S/N Ratio > 74 dB rms at 30 Hz ~ 20 KHz
    Enphasis 50 or 75 µS - selectable
    RF Connectors N-F 50 ohm
    Input Base Band Impedence 2 Kohm
    Input Mono Impedence 600 Ohm
    Cooling Forced air
    OP. Temperature Range 0 ÷ +45°C
    Maximum Umidity 90%
    AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz
    DC External Supply (option) 12~15 Volt Negative Ground
    Dimension 1 Unit Rack

     

    Frequency Ranges 1.5~2.5 GHz (20 MHz band) - (other on request)
    Type of Modulation FM Class F3
    VCO Tuning 25 MHx
    Frequency Stability ± 2.5 ppm (Better on request)
    Synthesizer Step 25KHz
    Image Rejection 70dB Typ.
    RN Noise Figure 6dB or lower
    Stereo Separation > 45 dB @ 1 KHx
    Distorsion < 0.5% (TYP 0.2 % @ 1KHz)
    Base Band 30 Hz - 60 KHz within 0.15 dB
    Unweighted S/N Ratio > 72 dB with 0.2 mV input (Typ 78 dB)
    Deenphasis 50 or 75 µS
    RF Connectors N-F 50 ohm
    Base Band-If Connectors BNC-F
    Base-Band Impedence 30 ohm
    Cooling Forced air
    P. Temperature Range 0 ÷ +45°C
    Maximum Umidity 90%
    AC Supply 100 ÷ 240 Volt; 47 ÷ 63 Hz
    DC External Supply (option) 15 Volt Negative Ground
    Dimension 3 Units Rack 19" 44 cm Depth
    Weight 6.5 Kg